Contact us


Mobile：86-15817786601 Jason

Tel：0769-81239353

Address：4th Floor, 61 Dongsheng Road, Huangcaolang Community, Dalang Town, Dongguan City, Guangdong Province

E-mail：jbdz@dgjumbo.com




FAQ


Maintenance methods
1. Maintenance after use
It is recommended that you clean it according to the instructions for the packaging of consumables. Disposable consumables are not recommended for multiple use. It has been used many times. If the selected material can be reused for 0. Connect the pipe, mask and mouth with full suction and other fittings for hot water cleaning and eliminating jade, not boiling or boiling water cleaning, in order to prevent thermal deformation.

Note:Do not boil or rinse the above pieces with boiling water in order to prevent heat distortion. After washing, I will dry all the accessories before storing them. When cleaning the avatar cup, it is necessary to install the filter element into the cup in time to avoid forgetting or losing the atomizer.

2. Replacement of filter cotton
Generally speaking, the filter cotton needs to be replaced once in three months. If it is found that the filter cotton is wet, it should be completely dried before it is used. Pull out the filter cover on the main engine and replace it.

3. Male care and maintenance
1. Do not fold the trachea when storing.
2. If you don't use it for a long time, please put down the power plug.
3. Keep away from children when storing.
4. Environmental limitations of transportation and storage: environmental leakage range: 20 ~55 C; relative humidity range: <80%; atmospheric pressure range: 500 hPa-106 ChPa.
5. Storage of non-corrosive gas and well ventilated indoors, avoid severe vibration when transporting.


Analysis and Elimination of Common Faults

  Number     Fault     Reason     Resolvent  
1 Excessive noise Filtration cotton is table loading Filling filter cotton
power supply is connected or not turn on electricity
tomization cup is deformed during cleaning Replacement of atomizing cup
2 No spray Whether the trachea folds or not Maintain airway patency
The atomizing cup is blocked Replacement of atomizing cup
Is the liquid used up? Re-adding appropriate amount of liquid medicine
The cup cover is installed correctly. Repeatedly open and close the air pipe port after start-up
For other problems, please contact the supplier or manufacturer, or clean up professional maintenance.




Question consultation
( Columns with *must be filled in )


Name can't be empty!

Mobile phone number can not be empty!

Message content can not be empty!







File Download